SPEDIZIONI GRATUITE PER ORDINI SUPERIORI A 49,99€

Casco MTB Enduro 3.0 versatile con mentoniera removibile

PROTEZIONE 3 IN 1 PER TESTA E CERVELLO

SKU: 1024120291
€299,99
IVA inclusa
Imposte incluse. Spese di spedizione calcolate al momento del pagamento.
Questo articolo non è disponibile

Il casco più versatile che puoi acquistare! Il casco Enduro 3.0 offre tre diversi livelli di protezione. Indossa la mezza calotta per le giornate sui sentieri leggeri oppure aggiungi la copertura sopra le orecchie per percorsi leggermente più aggressivi. Per una protezione totale, aggancia la mentoniera per una protezione integrale quando ne hai bisogno!

Realizzato con una calotta in polimero leggero, il casco Enduro 3.0 presenta una costruzione Powerbridge per una maggiore resistenza della calotta. Il casco Enduro 3.0 è dotato anche della Tecnologia 360° Turbine. Questi piccoli dischi blu che si muovono a 360° sono realizzati con una forma e un materiale che assorbe energia. Questa tecnologia offre due vantaggi esclusivi: riduzione dell'accelerazione rotazionale della testa e del cervello e assorbimento dell'energia in caso di impatto a livello di commozione cerebrale.

Il micro regolatore sul retro assicura una vestibilità perfetta. È presente anche un dock per riporre gli occhiali da sole quando non sono necessari. La visiera è regolabile e dispone di una funzione di sgancio per ridurre ulteriormente la forza d’impatto rotazionale.

Scegli il tuo stile e preparati per qualsiasi sentiero con il casco enduro 3-in-1.

  • Assorbitore di forza PowerBridge in-mold
  • Calotta in polimero leggero disponibile in tre taglie
  • Design casco 3-IN-1:
    • 1. Casco aperto a mezza calotta
    • 2. Mentoniera rimovibile con sistema a pulsante
    • 3. Coperture opzionali sopra le orecchie con sistema a pulsante
  • Dock per occhiali da sole per una conservazione facile e sicura
  • Chiusura magnetica Fidlock
  • Tecnologia 360° Turbine
    • Riduce il picco di accelerazione cerebrale fino al 30% a velocità d’impatto associate a commozioni cerebrali
    • Riduce il picco di accelerazione rotazionale cerebrale fino al 40%
  • Visiera regolabile con funzione di sgancio per ridurre la forza d’impatto rotazionale
  • Schiuma d'impatto in-mold per un assorbimento superiore dell'energia
  • Ventilazione massimizzata con 20 prese d'aria, efficace anche a basse velocità
  • Fodera interna traspirante, antiodore e lavabile, che assorbe l’umidità
  • Certificato e testato: AS/NZS 2063:2008, EN1078, CPSC 1203, ASTM F1952–10
  • Peso: a partire da 690g (1.52 lbs). Senza mentoniera: a partire da 360g (0.79 lbs)
  • Taglie:
    • #S (51-55cm – 20-21 5⁄8")
    • #M (55-59cm – 21 5⁄8- 23 1⁄4")
    • #L (59-63cm – 23 1⁄4 - 24 3⁄4")

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Chris Caprin | Chris is "the wise man" of the Editorial team for vttae.fr
this multifunction helmet has seduced us

Thanks to its fairly small footprint, its extremely modular nature, its more than honest comfort and its very reasonable weight, I was really seduced by the Leatt Enduro 3.0.
This helmet with its innovative concept seemed really successful to me and above all capable of satisfying all kinds of practices and practitioners. In addition, its relatively affordable price places it among the good deals in its category... Especially if we take into account the innovative and multi-use side of the product. In short, we validate 100%!

https://vttae.fr/test-du-casque-leatt-enduro-3-0/

C
Cory Benson is the EU Tech Editor of Bikerumor.com
3 helmets for the price of 1

Editor’s Choice – All-mountain/Enduro: Leatt 3.0 Enduro MTB convertible
The new Leatt 3.0 Enduro MTB ($260 at Jenson USA) helmet is 3 helmets for the price of 1. It gives you full-face gravity protection, a 3/4 shell for extra enduro ear coverage, or a classic trail-ready half-shell. And it does all three quite well, actually. It’s my go-to mountain bike helmet whenever I travel, as I can change modes as my mood or even trail conditions change. I can do cross-country, all-mountain, or even go full enduro… all with one helmet. It’s not quite light enough to go XC racing or ride gravel. And I’d prefer a 1-piece lid for full-tilt DH riding. But anywhere in between, this one hits it on the money.

The previous generation that only had a lever-actuated chin bar was a bit easier to remove even while pedaling. But these removable ear covers or the chinbar each snap so securely in place to be confidence-inspiring. But they probably will require you to stop and put a foot down for a second to snap them off for longer uphill sections. I like the safer feeling of extra protection on technical downhills, but love that I can easily pop the ears or chin off for extended climbing so I don’t overheat.

https://bikerumor.com/bikerumor-editors-choice-2023-corys-best-bike-gear-awards/

C
Christian Franke
Leatt has achieved a great success with the Enduro 3.0

Leatt has achieved a great success with the Enduro 3.0: Not only does the helmet work really well in all three modes, with a few minor drawbacks. He also makes you look damn good! If you're still wondering: "Why do I need it?", I can answer: Due to its small packing volume, this would be my personal helmet for the next trip to Canada. But I can also think of many reasons to use the helmet in my home country.
https://www.mtb-news.de/news/leatt-enduro-3-0-mtb-helm-test/?utm_source=g3c-dk

D
DZ
The best MTB helmet out there

I bought the Enduro 3.0 for a trip to Colorado that combined big trail rides and days at a few different bike parks. Long story short, the helmet was more comfortable than expected in each of the three set ups. I did "test" the Turbine technology with a high speed crash into the rocks. The helmet was luckily in full-face mode at the time. My head was fine, but there was visible damage to the exterior. One call to Leatt's customer service and they set me up with a replacement at a sweet deal. I'm now riding my replacement helmet 3-4x week, mostly in open-face mode and loving it!